README DNP DS80 Printer Firmware v1.30 Update Utility
2020-09


General Information: 
This firmware update utility will install v1.30 firmware onto the DS80 photo printer.  Installing this firmware may add functionality or modify printer behavior for improved functionality.  
Installing the most current firmware version will include all improvements of the previous firmware updates.  Installing each of the incremental updates are not necessary.  

The firmware update utility for Windows supports OS 7/8/10.

The firmware update utility for Mac OS-X supports versions 10.13, 10.14, and 10.15 Utility may operate on previous Mac OS back to 10.10 but older OS is not supported.

Ensure the printer is Idle and has print media loaded.  
After unzipping (ZIP) for Windows OS and or opening the disc image file (DMG) for MacOS, copy or save the contents to your computer desktop. Review the update installation information, then run the update application file.  

Instructions:
1 Confirm your DNP printer is connected and powered on  
2 Download the firmware update file
3 Unzip the file that was downloaded (Without this step, the update tool will not run)
4 Select the folder that matches your operating system, 
       For Windows select either 32bit or 64bit 
5 Double click on the application file, DS80_0130_32 or DS80_130_64.  You should see only one application file, the name will depend on the folder that was opened.
6 Follow the directions of the application as prompted.

For Mac Open the Disc Image and access the update file and User Guide. Review the instructions. 

NOTE: The LEDs on the printer will flash while the firmware is being updated.

- The printer will "beep" several times during this process. 
- The computer display will show the update progress.
- Wait until the update process has completed.  
- DO NOT interrupt the process.  The dialog box will indicate completion.  

- The entire process will take about a minute to complete.


IMPORTANT CAUTION NOTE:  

DO NOT turn off or disconnect the printer or PC during this process once it starts. 
DO NOT try to make a print or change media during this process.


Note: 
Some new features require the complementary printer driver update to enable and use the functions.  

What's being updated? 
2020-09 
Update the security descriptors of DS80 Firmware Utility for Mac OS 10.15 
- The firmware version is unchanged. 


DS80 v1.30 - 2012


© 2020 DNP Imagingcomm America Corp. 

2020-09 bi